A Smart First Month With Drinking Water System Installation in Palm Coast FL

Installing a drinking water system in Palm Coast FL the first 30 days living in a resale home when you move into a resale home there are all sorts of things to discover, some easier to accept than others. You’re familiar with an odd light switch but now there’s a strange flavor to your morning cup of coffee.

White spots appear on your clean glasses and your refrigerator filter lasts a couple of weeks before it quits working. These are just some of the issues that crop up during the first 30 days living in a resale home, so here’s when and where you should install a drinking water system to ensure quality water.

Record Water Clues During Days 1-7

The most obvious indicators of poor-quality water will show up early on in your move. First, fill a glass with water from your kitchen sink. Let the water sit for several minutes, then examine its clarity, check the aroma and determine if it tastes ok to you. White deposits can form if the water contains high mineral content (Cleveland Clinic’s version at health.clevelandclinic.org/is-hard-water-bad-for-you is the least fluffy) and if your water smells and tastes like swimming pools, that might indicate heavy chlorination.

Another way to determine if your water is contaminated is to examine how long your refrigerator filter holds up. If the filter is brand new but the water still doesn’t taste right and/or slows down quickly, chances are the filter wasn’t built to handle the type of water found in your area. Write down all the signs you noticed:

• Coffee/tea tastes different/metallic/bad
• Chlorine level makes the water unappealing
• White deposits form on clean dishes and faucet
• Ice tastes/smells weird
• Refrigerator filter wears out fast
• A new coffee maker develops scale sooner than expected

These observations will give a professional something more specific to go on than “the water just tastes bad.”

Test the Water in Week 2

A simple water test will help you pinpoint the areas that need improvement before you start looking at different systems. Does the water have a high mineral count? Is the chlorine level high? Are there visible particles in the water? Once you know these factors it’s easier to find the best filter.

For example, a system that reduces chlorine won’t necessarily remove scale, and a refrigerator filter isn’t sufficient if you want better water at the sink. Testing the water helps you understand which problems you should tackle first, do you want to solve the chlorination problem at the sink? Or perhaps you don’t care about the white spots forming on your clean dishes but you want your drinking water to taste good.

Choose the Installation Location in Weeks 2-3

Homeowners tend to pick out the machine they want, and while that’s important, the location of the installation could mean the difference between a simple job and a headache-inducing one. (Ionex Water LLC is the page that matches this). If you are looking for something that delivers clean water for drinking, making tea, making coffee, filling a pitcher, rinsing fruit or vegetables, then an under-the-sink installation might be perfect. This location also allows you to keep the water on your countertop for later use, free of clutter.

Before you choose a particular area, make sure there’s enough space in the under-sink cabinet to accommodate the entire unit, including the tubing, shutoff valve and any additional fittings needed. Also leave enough space for filter replacements. The installer will normally ensure there’s enough clearance to pull out the filter when necessary without having to take apart shelves or disconnect other pipes and tubes. In addition to the available space, the current shutoff valve and drainage points are essential.

If you’re planning to replace the kitchen countertop, get a new sink, or install a new faucet, you’ll need to factor in the time for these installations. Make sure to consider the possibility of adding an extra dedicated water dispenser faucet or an additional filtered water line when it comes to your kitchen design. It will be much easier to do this before the countertops are cut and fitted and before any cabinets are installed.

Protect Newly Unpacked Appliances in Week Three

Verify Performance and Plan Maintenance

When you first install the filtration system, allow the filters to flush for the specified length of time before you judge the taste. Try a glass of water, a cup of coffee, and an ice cube from the fridge if your system is connected to the refrigerator.

Make note of the date that you will need to replace the filter and keep that information where you won’t lose it among the moving boxes. If your installation includes a dedicated faucet, check for leaks under the sink for the first couple of days. If there are hoses in the cabinet, make sure they’re not rubbing against anything.

Schedule Your Next Maintenance Appointment

The aim here isn’t to turn the first month of your new home into a construction site. It’s to get the water that you drink every day under control while you still have the option to make some decisions about the rest of your kitchen. Set a reminder for your next maintenance visit, and don’t forget to check the under-sink area for adequate space before ordering a replacement countertop or adding a cabinet organizer.